Replacement of Parts
Installing the LCD Panel Step 1. Install the new LCD panel by fitting it in from the bottom first before pushing it down till it snaps into place. Make sure the plastic holders secure the LCD panel properly. Step 2. Latch the wiring back in the plastic hooks neatly. Step 3. Reinstall the LCD harness and replace the screw securing it. Step 4. Reconnect both the LCD and LED connectors. Make sure the connectors are correctly secured. Caution! Please note that the colors of the wiring of the LCD connector are different from that of the LED connector. When connecting, please check that the sequences of the colors of the connectors match on both ends.
Step 5. Replace the remaining components for the LED PCA (refer to the procedures in Installing the LED PCA from Replacement of LED PCA).
Removal and Replacement of Parts (without Calibration) 7-15
